Monday 31 October 2016

Gruntz 15mm: The first two factions

I've now collected two factions for my near-future forces for Gruntz 15mm.

The first is a hi-tech interventionist force  ('The Coallition'). They are almost all GZG and will be sand-coloured like the Gulf War allies. Some assets such as the power-armoured squad will be finished in blue-grey or some other neutral colour so they can fight for any faction if that's the way I want to use them.

The Sand faction: Grav IFVs, Grav MBT, Grav Command vehicle, Gruntz squads including squad leaders, SAWs and LAWs, Grav bikes. All models are GZG.
Grav drones, Sand commander, Spider droids, Power-Armour squad. All models are GZG except for the Power-Armour squad which is Brigade Miniatures.
The Gruntz are GZG's UNSC Light Infantry. Command vehicles provide command and control benefits additional to the powers of the Commanders. I'd like to organise the grav drones and probably the grav bikes and spider droids as if they were Gruntz squads rather than having to track them as individual units. This was discussed on the Gruntz Forum but requires further research with regard to costing etc.

The second is a mostly mid-tech force ('RussFed') and will be finished in green.  They are mainly ArmiesArmy Insurgents and represent a near-future version of the Russian forces which have been operating in the Eastern Ukraine. While technically not as advanced they will be rated as more experienced.

Tracked IFVs, tracked MBT, tracked Command vehicle, HMG, Commander, Gruntz including Squad leaders, LAWS, and SAWs, VTOL gunship, and Mecha. The last two are GZG. The rest are all ArmiesArmy.
Constructing the Mecha so that it stood in an animated stance was quite fun. The AA vehicles are part resin which makes them substantially lighter than the GZG ones. They also required less cleaning up. Almost everything was assembled with superglue apart from the arms of the Brigade Models figures which required epoxy resin.

The GZG and ArmiesArmy infantry are a good scale match for each other.

Monday 24 October 2016

10mm Seven Years War progress 2

Old Fritz
The first step after PVAing the figures to the combination MDF and steel bases was to texture the bases. I used a cocktail stick to apply PVA not only to the MDF surface but also onto the figure bases and around the figures' ankles. This is essential to hide the figure bases. I then poured over a mixture of bird sand and model railway ballast, shook it off, and repeated the application. (For 15mm figures I build up the bases with filler and then apply PVA. For 6mm figures I use bird sand without the ballast.)
As the figures for this project are packed very closely together, it wasn't possible to get right to the centre of the bases. This doesn't matter as this area will end up dark brown representing deep shadow.

With the figures so tightly packed, the ArmyPainter spray undercoat (Leather Brown) also didn't get between the figures too well so I had to  go over them with a generous wash of matching AP bottle paint.

A unit of Prussian Musketeers based, textured and undercoated.
I thought I'd have to add some coat colours before rendering the figures distinguishable and thus usable on the table, but I've now added temporary labels to tell the armies apart and to keep the appropriate bases in each unit together. I'm very glad I've never dropped these or muddled them up as it would have been a very tedious job to distinguish, for example,  Prussian, Austrian and Hungarian line infantry.

The unit duly identified from the rear.
For the benefit of those who haven't seen earlier postings, these are 10mm Pendraken figures for use with Maurice or maybe Might & Reason.

Monday 17 October 2016

Might & Reason: Mollwitz

 The Austrian defence viewed from the Prussian end:
infantry to the left and cavalry to the right.
My club comrade Chris put on and umpired an introductory game of Sam Mustafa's Might & Reason. The game was an abridged version of the Battle of Mollwitz (1741) scenario. The real battle was fought between Prussia and Austria during the early part of the War of the Austrian Succession. The Prussians had to dislodge an Austrian scratch force sitting on their supply line. The game featured Chris's balsa block armies which were enhanced by authentic flags and worked very well. My fellow club member, Kim, was given command of the Austrians, a difficult assignment, while I got the Prussian killing-machine and an exceptionally lucky run of high dice throws.

Monday 10 October 2016

My Irregular Wars Colonial Portuguese and Hollanders

General with Dutch East India Company flag
My 15mm Colonial Portuguese and Hollanders are finally finished. I first posted about these back in April 2014, i.e. two-and-a-half years ago!

The figures are mostly Grumpy's Miniatures and designed to be interchangeable between Portuguese, Dutch and Spanish colonial forces where appropriate.

As the figures came out rather dark I went light with the bases which looks good for the Tropics.

If you look closely you will see there is no facial or much other detail. The figures are designed to be viewed at playing distance. The 'realism' is achieved by (a) staining, and (b) the ground. The latter requires little time or effort but adds a great deal to the look. IMO this approach provides the most economical balance between effort and effect.